Chain plate conveying belt for producing customized stainless steel material high-temperature resistant forging piece chain plat

16A hollow chain, the thickness of the chain plate is 2.5mm, the stainless steel material is used, the outer diameter of the imported bearing is 32mm, the inner hole is 15mm, the 6202rz bearing, the crx bearing, Because the bearing friction coefficient is small, power saving and energy saving, silent, strong, the support shaft adopts 15 mm, 40 × 80 track, because the bearing can rotate and the bearing steel is wear-resistant, it has achieved the goal of fast silence,2 meters per second.

1, high temperature resistance,, heat resistance is strong.

2, high speed, 1:, just a few seconds.

3, silent,, the friction coefficient between bearing and transportation track is small,, and it is very easy to run.

4, energy saving, now is not chain sliding friction,,, the motor power of this kind of bearing chain plate conveyor is twice as small.

5,, the bearing is broken, open the opening pin to replace a bearing, simple and convenient.

6,, the bearing of the conveyor sprocket is gradually in contact with the track,.

.

,.

 9, the silent high-speed chain board conveyor has the high speed of the chain conveyor, but also has the stability of the chain plate conveyor, but also has the seamless non-stuck material of the chain plate.

,.

11,.

The hot forging conveyor developed by our company is: bearing chain plate conveyor, close chain plate conveyor, flat chain plate conveyor, precision roller chain conveyor, silent tooth chain conveyor, drum conveyor, chain rod conveyor, The Great Wall net belt conveyor, the chain net conveyor, the net belt transportation machinery.

Order forging and forging conveying machinery, conveyor belt, transport belt, transmission machinery, required data

1, length, width, height and speed 2, weight of conveying parts

3, shape and size of parts.

根据客户要求定做链板输送机两台，发货规格：节距50.8mm，长度都是2.2米，其中一台高度一头400毫米,有效宽度180毫米，支轴总长度242毫米,一头750毫米到850毫米大架子不锈钢304材质的，0.375电机,链轮8齿数,25的速比,输出8-40转,输送机两台链板提升机，另一台有效宽度240毫米,板厚3毫米，不锈钢304的，链板输送带 ，大架子不锈钢304的，速比25，转数8-40转，0.37的电机，支轴总长度302毫米

锻造件链板输送机简介：

锻造件输送机也叫锻造件链板传送带，是用来输送和运输，传送锻造件的自动化输送机械，锻造件输送机械采用耐高温的，不变形的，耐热的不锈钢链板输送机（平顶链链板输送带和合页链板输送带或者槽钢链板输送带），如果宽度小于等于304.8毫米就采用平顶链链板，如果宽度超过304.8毫米就采用合页链板输送带或者槽钢链板输送带，链板输送根据客户要求长度，宽度，高度都可以定做。链板输送机可以增设各种挡板等等其他附件，可以根据客户需求冲孔。

高速无声链板输送机