全智能型触摸屏办公椅靠背疲劳试验机办公椅靠背测试机

本试验机用于评估施加于椅子靠背之力度所引起的疲劳压力和磨损能力。

参考标准：EN1728，EN12520

1、座有效负荷一定重量--不得导致结构损坏或功能降低

2、测试周期为25000次，不得有任何失败。

主要技术参数：

1、用EN　CMD确定出底座和靠背的施力点，并作标记

2、用模具装置直插升压棒，防止滑动

3、椅子的所有功能都调至 差状态

测试程序

4底座施加砝码225BL，靠背施加60kg的力。

5靠背动一次为一个循环，测试周期为25000次或其它次数

完成测试后椅子不能出现功能失效、裂纹、松动。同时需要满足稳定性要求。

6.靠背力量输出：2000N范围设定

7.坐垫压力：砝码

8.显示器：触摸屏控制器显示页面按照客户要求设置

9.次数调节：999999

10.图片只供参考

11.传动：日本松下私服电机

12.减速机：台湾利铭

13.拉带规格：40*2

14.速度：10-30次/分钟

15.材料：方通100*50mm　方通：80*40mm　四角安装轮子　

Full intelligent touch screen office chair back and back test machine
The test machine is used to evaluate fatigue pressure and wear ability caused by the strength of the back of the chair.
Reference: EN1728, EN12520
The weight of the seat will be heavy -- no structural damage or decreased function
The test cycle is 25, 000 times, no failure.
Key technical parameters:
Use EN CMD to determine the strength of the base and back, and mark it
Use the die device to plug the lift bar to prevent sliding
All functions of the chair are adjusted to the worst
The test program
The base weights 225BL with a 60kg back.
The reclining is a cycle of 25,000 times or other times
After completing the test, the chair should not fail, crack,.
Back strength output: 2000N scope setting
Cushion pressure: leverage
Monitor: the touch screen controller displays the page according to the customer's request
9 times: 999999
Pictures are for reference only
Drive: Japanese panasonic personal motor
Decelerator: Taiwan liming
Pull band size: 40 * 2
Speed: 10-30 beats per minute
Material: square to 100 * 50mm square: 80 * 40mm four corners installed wheels