LED低压应急电源AC12-36V低压灯具应急驱动
- 买家还在看 -
产品详情
“LED低压应急电源AC12-36V低压灯具应急驱动”参数说明
是否有现货: | 是 | 认证: | CE RoHS CB |
电路结构: | 常规变压器降压 | 驱动方式: | 恒流式 |
型号: | Hm-lp501 | 规格: | LED低压应急电源 |
商标: | 鸿蒙 | 包装: | 中性包装 |
专利分类: | LED低压应急电源 | 专利号: | LED低压应急电源 |
产量: | 1 |
“LED低压应急电源AC12-36V低压灯具应急驱动”详细介绍
技术参数
Technical data
输入电压AC12-36V 50-60Hz
-
- Input rated voltage:AC12-36V 50-60Hz
额定充电功率 5W
-
- AC Input power rated 5 W max
功率因素:>0.5
-
- Power factor: >0.5
充电时间:≥24小时
- Charge time ≥24 hours
充电模式:持续性恒流
-
- Charge mode: trickle re-charging on battery
应急功率1-10W,输出电压DC12-56V,可负载10-50W
-
- Output emergency power 1-10 wattage DC15-56V (10-50W)
锂电池容量:2000mAh, 2200mAh, 2600mAh
-
- Battery capacity (LIR) 2000mAh, 2200mAh, 2600mAh
充电电流:200mA
-
- Battery Charging Current: 200mA
1-3小时应急时间,或定制应急时间
-
- 1-3 hours emergency time, or customized emergency time
应急器外壳最高耐温70度
- 70℃
流明:120LM/W
- Lumen Factor: 120lm/Wattage
应急器和电池均有绝缘加强
-Reinforced insulation between the supply and the battery circuit.
重新连接电池后,应急器可以正常为电池充电
-This unit can recharge the battery normally after reconnecting of battery.
LED指示灯
LED indicator
1.连接AC/DC12-36V主电正极以及驱动输入正极,可在驱动输入正极中间增加墙壁开关,作为控制主电照明开关
R: main power and the positive pole of the drive input, and a wall switch can be added to the positive pole of the drive input to control the main power lighting switch
2.连接AC/DC12-36V主电负极以及驱动输入负极
main power negative pole and drive input negative pole
3.连接LED驱动输出正极
4.连接LED驱动输出负极
5.连接LED灯板输出负极
6.连接LED灯板输出正极




向您推荐
内容声明:您在中国制造网采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。
价格说明:该商品的参考价格,并非原价,该价格可能随着您购买数量不同或所选规格不同而发生变化;由于中国制造网不提供线上交易,最终 格,请咨询卖家,以实际 格为准。