全自动KF94图钉头带式鱼型口罩机 3M9332口罩生产线
Thumbtack headband fish mask machine

AMM-1-2H

一、基本介绍 BAsic introduction
图钉头带式鱼型口罩机∶秦泰盛公司依据客户需求，通过PLC编程控制，通过自动送料，压纹、
对折、切边，翻转，焊接耳带等工艺一次成型，成功研发设计出全新的全自动鱼型口罩机，本
机具有自动化程度高，操作简单， 人性化的特点。

Fully automatic fish mask machine: According to customer needs,Qin-Tech is
controlled by PLC programming, through automatic feeding,embossing, folding,
trimming, flipping, welding ear straps and other processes at one time,
successfully developed and designed a new automaticfish-shaped mask machine High
degree, simple operation and more user- friendly features.

二、设备技术参数 Technical Parameters
型号∶ANM-1-21
材料两层无纺布两层熔喷布（可以到6 层）
电压∶AC 220V，50HZ  Voltage:AC 220V,50HZ
重量∶1500KG Weight:1500KG
外观尺寸∶
长宽高∶12814(L)*159(W)*1931(H)
效率∶40 pcs/min(±10%) Efficiency:40pcs/min(±10%)
产品规格∶可依据客户要求进行定制
适用行业∶一次性医疗防护用品

Model:AMM-1-2H
Material:2 ply of non-woven and ply of fabric(Up to 6floors)
Voltage:AC 220V,50HZ
Weight:1500KG
Size:Length,width and height:12814(L)*1597.5(W)*1931(H)
Efficiency:40pcs/min(±10%)
Product specificationgs:can be customized according to cushomer requirement.
Applicable industrides:disposable medical protective queipment

三、产品特性 Product Features
整机由料架部分，上鼻线部分，超声波封边 喷字母与L0G0两台，自动贴海绵，一次裁边，折边
，超声波封边2，，人焊接真带部分，二次裁边，成品下料，NG品检出，自动包装，成品流出，
采用伺服电机，超声波焊接技术完成生产。

The whole machine consists of the material rack part, the upper nose line
part,ultrasonic edge banding 1, spraylet terand L0GO two sets, automatic sponge
sticking,primary trimming, edge folding, ultrasonic edge banding2, welding ear
strap section,secondary trimming, finished product blanking, NG product detection,
automatic packaging, finished product outflow, servo motor, ultrasonic welding
technology to complete product ion.

1.科架部分∶自动送料，刹车配合控制器，保证材料张力。
2.鼻梁条部分∶采用调速电机控制自动输送鼻梁条配合齿模超声波焊接
3.外形熔接部分∶定制齿模配合超声波，完成纹路焊接。
4.折叠成型∶折叠布料
5.外形切刀部分∶定制切刀，滚切成型。
6.翻转部分∶可根据口罩焊接方式实现翻转。
7.头带钉制∶采用全伺服控制效率高每分钟可高达40PCS（±10%）。
品检出∶NG品自动抓至NG盛装箱中人
9.成品输出∶口罩成品输出，孜集。）
10.自动包装

1 Material rack part: automat ic feeding, brake cooperate with controller to
ensurematerial tens ion.
: the cylinder is welded by ultrasonic wave, and the nose
bridge is automatically conveyed
: the mold is matched with ultrasonic wave to complete the
texture welding.
: folding fabric
: customized cutter, roll-cutting forming.
: turn the mask over.
: Adopt full servo control, highyefficiency, up to 40PCS
perminute (士10%).
: The NG product will be automatically caught inthe NG
container
: output and collection of finished masks.

四、工艺流程图∶Craft Flow chart

五、设备使用环境
1.10万级无尘车间使用
2.温度∶室温环境，湿度∶40%-80%
3.电源∶AC220V，50Hz &60Hz
4.气压∶0.4MPa～0.6MPa

六、原材料规格（建议）：
由外至内(材料幅宽260mm)        
第一层    SS级50克无纺布    外层
第二层众    99级25克熔喷布    
第三层    99级25克熔喷布    
第四层    SS级25克无纺布    内层

Raw material sspecifications (recommended) :
From outside to inside (material width 260mm)        
The first ply    SS grade 50gnon- woven    Outermost
The_ second    99grade 25g melt blown    
The third ply    99grade 25g melt blown    
The fourth ply    SS grade 25g non-woven    Innermost