请问我们生产中是否出现以下现象：
Is there appear the following phenomenon in our production :

1、盘点时元件亏损大丢失量大找不到原因
When make an inventory of component loss is big, lost quantity is big, can’t find the reason.
2、技术人员贴片机程序设定好后还是有大量元件贴偏或者错位抛料；为不流出不良增加别的检测设备，增加人工
Technical staff to set the SMT machine program there have large number of components after post partial dislocation or extractor; Bad not to flow to increase other testing equipment, to increase artificial
3、是否经常机器报警；吸嘴粘带元件
Whether or not the machine often alarm; Suction nozzle with components
4、是否确认好机器正常还是生产出大量缺的产品
Whether good machine is normal or produce a large number of missing products
5、是否停机次数多影响产能
Whether more downtime influences capacity
6、是否申购更换吸嘴比较频繁，吸嘴消耗特别大成本降不下来
Whether to purchase replacement of suction nozzle are frequent, suction nozzle consumption particularly big cost
7、.............等等  …….etc.
由此造成的损失有知道吗？
The resulting losses have know?



第四代吸嘴清洗机特点
The fourth generation of suction nozzle cleaning machine characteristics
》一次清洗36只吸嘴（只需要短短几十秒）
One cleaning can cleaning 36 nozzles (only need few seconds)
》清洗液二级过滤循环使用，全球 （解决频繁添加清洗液和处理废液问题）
Cleaning fluid secondary filtration cycle use, first of the world (solve the problem of frequent add cleaning fluid and processing waste liquid)
》清洗不需要气源，仅干燥时使用，全球 （解决了普通清洗机品质对气压的依赖）
Not need clean air, used only dry, first of the world (solves the common washing machine of reliance on air quality)
》自动添加清洗液、自动排除废液，全球 （提升自动化程度，减少人工成本）
Automatically added cleaning fluid, automatic eliminate waste liquid, first of the world's first (to improve degree of automation, reducing labor costs)
》所有品牌吸嘴兼容，全球
All brand compatible suction nozzle, first of the world.
》动态化清洗
Dynamic cleaning